AMI UC324 Ball Insert Bearings

B4:13 mm; Basic static load rating C0:190 kN; s2 max.:5.3 mm; B:28 mm; Mass bearing + sleeve:1.5 kg; Operating clearance factor k2:0.123; r1,2 min.:1.5 mm; D1 ≈:97.9 mm; d3:80 mm; B1:47 mm;

Grease Speed Rating n1:4000 rpm; d:50.000 mm; D:110.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5300 rpm; B:44.40 mm; Basic Dynamic Radial Load Rating C:95200 N; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:4000 rpm;

A1:53.975 mm; A3:42.875 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; A2:39.675 mm; Mass locking plate:0.39 kg; L:185.725 mm; B:3.969 mm;

D:190.0000 mm; Basic Static Radial Load Rating Co:150000 N; B:43.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:168000 N; d:90.000 mm; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4200 rpm;

G1:17 mm; Nut for removal:KM 38; Hydraulic nut:HMV 38 E; d:180 mm; B2:110 mm; G:M 190x3; B1:105 mm; d1:170 mm; Mass withdrawal sleeve:3.42 kg;

Basic Dynamic Radial Load Rating C:9750 N; D:37.0000 mm; Oil Speed Rating Open/Shielded n2:24000 rpm; Sealed Speed Rating n3:14000 rpm; B:12.00 mm; d:12.000 mm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; Basic Static Radial Load Rating Co:4150 N; Grease Speed Rati

Recommended tightening torque for grub screw:7.4 N·m; s1:24.3 mm; Hexagonal key size for grub screw N:3 mm; L:118 mm; Mass bearing unit:0.69 kg; J:92 mm; A:35 mm; T:45.3 mm; Bearing:YSP 207 SB-2F; Fatigue load limit Pu:0.655 kN;

Oil Speed Rating n2:9000 rpm; D:90.0000 mm; Grease Speed Rating n1:6700 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:30500 N; d:40.000 mm; Basic Dynamic Radial Load Rating C:47500 N; B:23.00 mm;

Sealed Speed Rating n3:6000 rpm; Fillet Radius ra:1.00 mm; D:72.0000 mm; Grease Speed Rating n1:6000 rpm; d:35.000 mm; Basic Dynamic Radial Load Rating C:37700 N; Oil Speed Rating n2:8000 rpm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:27500 N; B:30.20 mm;

Coefficient of friction µ min.:0.08; Mass bushing:0.05 kg; h:16 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; a:3 mm; Specific static load factor K0:45 N/mm²; α:105 °; Tolerance housing:H7; d:15 mm;

Static (Coa):2900 kN; F:320 mm; rs (min):5 mm; s:4.3 mm; r1s (min):5 mm; Dynamic (Ca):1760 kN; E:mm; D:480 mm; b1:mm; B:130 mm;

da:150 mm; Initial grease fill, 40%:1.9 kg; Q150°:1040 kN; Adapter sleeve:H 2334; Q120°:1800 kN; Q180°:900 kN; Eye bolt, size:2 x M 20; H1:190 mm; Cap bolt, size:M 24x150; P90°:1300 kN;

Bearing:1313 EKTN9; Initial grease fill:175.77 g; Stabilizing ring:2 x SR-1613; Bearing limiting speed:6000 r/min; ba:32.544 mm; J1:53.975 mm; P90°:36 kN; A1:88.9 mm; N1:19.05 mm; Appropriate attachment bolt size G:0.625 in;

Grease Speed Rating n1:6000 rpm; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:39100 N; D:72.0000 mm; Basic Static Radial Load Rating Co:36500 N; Sealed Speed Rating n3:6000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8000 rpm; B:27.00 mm; d:35.000 mm;