Radial & Deep Groove Ball Bearings

Contact Now

Deep groove, or single row radial, ball bearings are the most widely used bearings. They utilize an uninterrupted raceway that makes them optimal for radial loads .This design permits precision tolerance, even at high-speed operation.NTN ball bearings use standard cages of pressed steel, as well as machined, brass cages for high-speed applications. NTN also offers bearings with locating snap rings.
Prelubricated bearings have integral seals, or shields, which are packed with long-life grease. In many applications, these bearings can be used without supplementary seals, closures, or protective devices. This design also offers the lowest possible manufacturing costs to the end user.Shielded ball bearings are protected on one or both sides by metal shields that are fastened to the outer ring. This close clearance labyrinth seal retains the lubricant and prevents the entrance of foreign matter.

 

Bearing Number Bore Dia Outer DIa Width Size
FAG 6215-C3 Radial & Deep Groove Ball Bearings B04264 0.0 N/A GARLOCK BEARINGS GGB
FAG 6226-C3 Radial & Deep Groove Ball Bearings 31171533 1.969 Inch | 50 Mill Single Row | Spheric Unit Only
FAG 6010-C3 Radial & Deep Groove Ball Bearings Ball Bearings 31171504 TIMKEN 0.068
FAG 6222-C3 Radial & Deep Groove Ball Bearings 0 ISOSTATIC B04264 ISOSTATIC INDUSTRIES
FAG 6209-C3 Radial & Deep Groove Ball Bearings TIMKEN 0.0 N/A Bearings
FAG 6306-C3 Radial & Deep Groove Ball Bearings With Pilot 4 Bolt Square Flange 0.0 Inch
FAG 6213-C3 Radial & Deep Groove Ball Bearings 90 mm TIMKEN 340.000 mm 0.1014
FAG 6316-C3 Radial & Deep Groove Ball Bearings 4 Bolt Round Flange 14.528 0.0 Flange Block Bearing
FAG 6311-C3 Radial & Deep Groove Ball Bearings LINK BELT 0.0 1.315 REXNORD
FAG 6308-C3 Radial & Deep Groove Ball Bearings Tapered Roller Beari 198.48 B04336 16.375 Inch | 415.92
FAG 6314-2RSR-C3 Radial & Deep Groove Ball Bearings NSK 0.0 Bearings RHP BEARING
FAG 6314-2Z-C3 Radial & Deep Groove Ball Bearings N/A 4 Bolt Pillow Block Pillow Block Inch
1/13